Tubing Connectors and Fittings
Med Vet International Cortical Nut, 4.5mm, J0375C, Each
Occasionally tapped threads strip and a larger screw is inappropriate. Lag screws are particularly vulnerable, as only one cortex is available for tapping. A cortical nut manufactured from implant grade nylon can give the screw purchase to allow normal tightening. The thread form is designed to grip the screw to minimize backing out. Sterile.
Microsolv Technology Corporation Tubing Connector Fittings, Low Pressure, 1/16", Polypropylene, White with 1/4-28 Screw Threads, for use with flanged, polymeric tubing. 10/PK.
These "Male Nuts" are used to connect polymeric tubing in the low pressures zones of HPLC systems and other low pressure, fluidic uses. Tubing must be flanged and Washers are required to work properly, and sold separately.
Grainger Double Coupling SS 2 in Pipe Size Socket
The BLUCHER Double Coupling Stainless is a double coupling made of stainless steel. It has a 2 inch nominal pipe size and is designed for use with stainless steel drainage systems. The coupling has no hub ends and provides a secure joint connection. It can accommodate minor degrees of misalignment. The double coupling allows joining two pipes of the same nominal size. It is manufactured in the United States.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, Nylon, Elbow, Hose Barb Union, 3/4"" ID; 100/PK
Create 90¿ bends in flexible tubing¿without the kinks!
Grainger Reducing Tee 3/4x3/4 x1/2 In CTS PEX Wht
The John Guest Reducing Tee Plastic is a reducing tee fitting made from polypropylene for use with plastic tubing. It has 1/2" and 3/8" ports and is suitable for pressures up to 232 PSI at 73°F. The tee has a maximum temperature rating of 180°F and is NSF/ANSI 61 certified for potable water applications. This product allows a transition from larger to smaller tubing sizes. It can be used for water lines, beverage dispensing, air lines, chemical transfer, and other fluid transfer applications. The tee fitting is made in the USA.
Microsolv Technology Corporation Tubing Connector Fittings, High Pressure, Two Pieces, 1/16", PEEK, Natural, Small Hex Head, Standard Length and 10-32 Screw Threads. Use with Single Cone Ferrules. Wrench Tighten, 1 EA
These Two Piece, "Male Nuts" are used to connect PEEK or Stainless Steel tubing in the high pressures zones of HPLC systems. This fitting has a 7mm diameter knurled head, 15mm total length (top to bottom), 11mm Thread Length and requires a Single Cone Ferrule, sold separately. 2 Piece Male Nuts are often chosen because they can be used at slightly higher pressures compared to 1 Piece Nuts. The required, Single Coned Ferrules will swage tubing grip it and not spin as you turn the Nut. As Ferrules wear down, they need to be replaced. This Nut can be reused with new Ferrules.
Sigma Aldrich Fine Chemicals Biosciences NorellR valved 5 mm NMR tu1EA
These NMR tubes feature a glass/PTfE pressure valve permanently joined to a choice of available sample tubes. These pressure tubes facilitate experiments requiring conditions such as pressurized inert atmosphere blanketing addition of reactive gaseous reagents under pressure containment of low boiling point solvents or samples at elevated temperatures.
Chemglass Life Sciences Valve, Chem-Vac, Glass Portion Only, 180°, 0-4mm Bore, 13mm OD Barrel, 9mm X 1.5W Sidearm
Valve, Chem-Vac, Glass Portion Only, 180¿, 0-4mm Bore, 13mm OD Barrel, 9mm X 1.5W Sidearm. CHEM-VAC valve glass portion only. Valve has two sidearms sealed to the barrel at a 180¿ angle to one another and on the same plane. Heavy duty rounded coarse thread and precision formed tapered seat. Dimensions as listed.
Ace Glass, Inc. PTFE 3/8" male NPT to 3/8" OD tube compression straight connector.
PTFE 3/8" male NPT to 3/8" OD tube compression straight connector.
AVANTOR MASTERFLEX (VWR LLC) John Guest Male Pipe Adapters, 1/4 X 1/8, 10 Per Pack
A single fitting offers secure connections and quick disconnection¿no need to purchase two fitting halves. Simply push tubing past the O-ring to the internal tube stop¿steel teeth on the collet grip tubing for leakproof connections. To disconnect, press collet against fitting body to disengage steel teeth¿ tubing slides right out. Fittings work with semirigid plastic (polypropylene, polyethylene, nylon) and soft metal (brass, copper, mild steel) tubing. To connect flexible tubing such as Tygon or silicone, order soft tube supports.
Medchemexpress LLC S18-000003 | 2068119-11-7 | 99.3% | 10 MG
A potent, selective, orally active inhibitor of the RORγt nuclear receptor for preclinical research into Th17-mediated conditions such as psoriasis. Demonstrates sub-30 nM inhibition of human RORγt, strong selectivity versus related receptors, and documented solubility and storage properties for experimental use.
- Potent and selective RORγt inhibition (IC50 <30 nM).
- Selective over other ROR family members (IC50 >10 μM).
- Orally active, enabling in vivo study applications.
- High purity for reproducible experimental results.
- Solid white to yellow form for straightforward handling.
- High solubility in DMSO (100 mg/mL) for stock preparation.
- Stable as powder at -20°C for long-term storage.
World Precision Instrument MicroFlow - Flow-through housed oxygen microsensor
The MicroFlow fiber optic oxygen sensor is a miniaturized fiber optic chemical sensor optimized for fast response time (t90 < 1 sec in gases, < 5 sec in liquids). The tiny probe has a tip size of 50 µm and is integrated in a T-shape flow cell for easy connection via Luer-Lock adapters to external tubings. Liquids (like water, blood, etc.) can be pumped through the cell.